Figure 75, Confi, Figure 76 – Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) User Manual
Page 801
Advertising
Brocade 6910 Ethernet Access Switch Configuration Guide
745
53-1002651-02
34
Traffic Segmentation
Interface
To configure the members of the traffic segmentation group:
1. Click Interface, Traffic Segmentation.
2. Select Configure Session from the Step list.
3. Select Add from the Action list.
4. Enter the session ID, set the direction to uplink or downlink, and select the interface to add.
5. Click Apply.
FIGURE 75
Configuring Members for Traffic Segmentation
To show the members of the traffic segmentation group:
1. Click Interface, Traffic Segmentation.
2. Select Configure Session from the Step list.
3. Select Show from the Action list.
FIGURE 76
Showing Traffic Segmentation Members
Advertising