Brocade 6910 Ethernet Access Switch Configuration Guide (Supporting R2.2.0.0) - Manual (Page 937)

Brocade 6910 Ethernet Access Switch Configuration Guide 881
53-1002651-02
42
Configuring Secure Shell
FIGURE 199 Copying the SSH User’s Public Key
To display or clear the SSH user’s public key:
1. Click Security, SSH.
2. Select Configure User Key from the Step list.
3. Select Show from the Action list.
4. Select a user from the User Name list.
5. Select the host-key type to clear.
6. Click Clear.
FIGURE 200 Showing the SSH User’s Public Key