Runtime:switch:trigger, Default, Syntax – Agilent Technologies Multiple Channel Controller 85330A User Manual
Page 124: Example, Runtime:switch:trigger -14
Advertising
7-14
85330A Multiple Channel Controller
Remote Programming Command Reference
Standard Command Reference
RUNTime:SWITch:TRIGger
The switch trigger source allows either TTL triggering from the REMote
controller to control the run-time sequencing or IMMeadiate triggering to
occur.
Default
The default trigger mode is IMM.
Syntax
RUNT:SWIT:TRIG IMM | TTL;
Example
RUNT:SWIT:TRIG TTL;
NOTE
This command is in revision A.02.31 or greater.
Advertising