To change the ttl state of aux 1 or aux 2, To view the most recent error message, To view the revision of the downloaded driver – Agilent Technologies Multiple Channel Controller 85330A User Manual
Page 72
5-6
85330A Multiple Channel Controller
Manual Operation
To Change the TTL State of AUX 1 or AUX 2
To Change the TTL State of AUX 1 or AUX 2
To set AUX 1 or AUX 2 TTL state:
1. Press:
[Select Instr] {85330A}
2. If the
{CLOSE}
softkey does not appear, press
[Prev Menu]
until it does.
3. Press:
{CLOSE}
4. Press:
{AUX_1}
or
{AUX_2}
5. Press
{0
} for TTL LOW or
{1}
for TTL HIGH.
To View the Most Recent Error Message
1. To view the most recent error message, press:
[Select Instr] {85330A}
2. If the {
ERROR?}
softkey does not appear, press
[Prev Menu]
(until it does)
3. Press:
{ERROR?}
To View the Revision of the Downloaded Driver
1. To view the revision of the downloaded driver, press:
[Select Instr] {85330A}
2. If the
{REV?}
softkey does not appear, press
[Prev Menu]
(until it does)
3. Press:
{REV?}
4. Press the
[
→
]
key to view the entire revision message.