Agilent Technologies Multiple Channel Controller 85330A - Manual (Page 19)

85330A Multiple Channel Controller 1-1
Installation
1
Installation
Installation at a
Glance The installation procedure is composed of the following basic steps:
1. If you just purchased an antenna measurement system, install all
components as described in the documentation that came with that
system. Do not connect the Agilent 85330A yet.
2. Turn on the system and perform a functional check.
3. If desired, verify the performance of the system components by referring
to the Performance Verification chapter of the system manual.
4. Install and verify the 85330A system as explained in this manual.