To view custom option number (if applicable), To manually send trigger pulses, To perform service functions – Agilent Technologies Multiple Channel Controller 85330A User Manual
Page 73
85330A Multiple Channel Controller
5-7
Manual Operation
To View Custom Option Number (If Applicable)
To View Custom Option Number (If Applicable)
Some 85330As are equipped with custom driver s as required by the
customer. Pressing:
[Select Instr
] then
[More]
the display will read:
Rev
Opt?
Test.
Click on
Opt?
This presents the custom option number (if any) for the driver.
To Manually Send Trigger Pulses
To manually issue a trigger to the receiver (EVENT TRIGGER), RF or LO
source (TRIGGER IN):
1. Press:
[Select Instr] {85330A}
2. If the
{TRIGGER}
softkey does not appear, press
[Prev Menu]
(until it does)
3. Press
{TRIGGER}
, followed by:
{RCVR}
to send a trigger to the receiver.
{SRC_1}
to send a trigger to the RF source.
{SRC_2}
to send a trigger to the LO source.
To Perform Service Functions
Service functions are located under the
{85330) {
→
} {TEST}
softkey menu. They
are not described in this chapter. Refer to