Agilent Technologies Multiple Channel Controller 85330A - Manual (Page 154)

85330A Multiple Channel Controller 9-25
Service
Preventive Maintenance
Preventive Maintenance
Preventive maintenance for the multiple channel controller consists of
cleaning various parts of the mainframe. The switch control unit and
switches do not require preventive maintenance. Agilent recommends a
twelve month interval between cleaning. However, cleaning intervals are
mostly dependent upon where the mainframe is used. The mainframe should
be cleaned more often if it is used in a dusty, or very humid area.
To perform the preventive maintenance, refer to the mainframe, Agilent
E1301B, Service Manual. The maintenance instructions are in the Operating
Instructions chapter.