Vaisala Hydromet Data Collection Platform - Manual (Page 109)

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA______________________________________________________________________ 107
Editing Reports
You can edit cells and reports in the Cell properties and Report
properties frame. The properties can be viewed alternatively by
clicking the corresponding buttons below the frame.
Editing Cell Properties
The Cell properties tab includes six text boxes.
The Text text box displays the text in the selected cell. Text marked
with gray, such as the variables, cannot be edited.
The Decimals text box displays the amount of decimals determined by
the variable in the selected cell. Correspondingly, the width of the cell
shown in Field width is determined by the widest variable.
The Alignment drop-down menu enables you to select whether the data
in the cell is aligned right (default), left, or centered.
In the Invalid data text box, you can enter the characters used to
indicate invalid data such as missing measurement results.
You can make a unit conversion by selecting from the Conversion
combo box. For more information on unit conversions, refer to section
Unit Conversion in Reports on page 109 .
To edit cells, you should first select the cell to be edited. To change the
width of the cells, you need to select the entire column by clicking the
gray number cell above the column.
NOTE Most text boxes in the Cell properties frame have default values
which you do not necessarily need to change.
NOTE The format setting in the User format overrides all other format
settings for the selected cell and it is available only on the Advanced
user level.