Vaisala Hydromet Data Collection Platform - Manual (Page 69)

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA_______________________________________________________________________ 67
Removing Communication Devices
To remove a communications device from your setup, proceed as
follows:
1. Select the device to be removed in the Selected list. Note that if the
device is used as a destination for reports, you must first disconnect
the reports sent to the device in the Communications view.
2. Click the Remove button.
Device Configurations View
In the Device configurations view, you can configure the
communications devices to be included in your setup; see
Figure 27 on
page 67 .
1004-062 Figure 27 Device Configurations View