Vaisala Hydromet Data Collection Platform - Manual (Page 68)

User’s Guide ______________________________________________________________________
66 ___________________________________________________________________M210785EN-E
Devices View
In the Devices view, you can select the communications devices to be
included in your setup and assign them to connectors; see
Figure 26 on
page 66 .
1004-061 Figure 26 Devices View
Selecting Communication Devices
To select a communications device, proceed as follows:
1. Select the device to be added in the Available list and click Add.
2. In the I/O connections frame, select a connector for the device
data and, if required, excitation signals. Note that for devices
connected to optional hardware modules, you must first add the
modules to your setup in the Optional hardware view.