Vaisala Hydromet Data Collection Platform - Manual (Page 152)

User’s Guide ______________________________________________________________________
150 __________________________________________________________________M210785EN-E
Automatic daylight saving time option and choose your DST
zone, Europe or USA, from the drop-down menu.
3. Save the settings by clicking the Save Setup button in the upper
right corner of the Configure setup window.
To configure the daylight saving yourself, take the following steps:
1. Go to Setup view.
2. Click on the DST tab. The DST feature is available only for
configurations made for MAWS version 6.02 or later. Select the
Automatic daylight saving time option. Choose User defined as
your DST zone from the drop-down menu and click Configure to
open the configuration window (see
Figure 71 on page 150 ).
0811-026 Figure 71 User Defined Daylight Saving
3. The start and end days for each year must be set individually when
configuring a user defined time zone.
a. In the Years to configure window, choose the range of years
included in the configuration by double-clicking the To and
From windows and selecting the year using the up and down
arrow buttons. See
Figure 72 on page 151 below for activating
the arrow buttons.