Vaisala Hydromet Data Collection Platform - Manual (Page 97)

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA_______________________________________________________________________ 95
Select your log destination from the Save log data to combo box under
Storage. You can choose between the internal and the external
memory:
- If you choose the internal memory, the option /Log/ appears by
default in the Destination directory field below. This is the fixed
internal log memory, which cannot be changed.
- If you choose the external memory, the option (sname) appears by
default in the Destination directory field below. The value of
sname comes from a static parameter which you can change in the
Setup window, or, after the setup is loaded to the logger, using the
AWS Client software. The value of sname denotes the directory on
the CF card into which the log files are stored.
The QML logger stores the gathered log information in daily files by
creating a daily file for each log group. The Number of days to
preserve log files option determines how many days these daily log
files are kept in the internal memory before they are automatically
deleted. You can also turn off this option, in which case the log files are
stored until the log memory is full.
0511-014 Figure 41 Log Group Options: Storage Section
Reporting Log Group Data
In the Reporting section, you can form time history tables of the log
group data to send out as reports. Note that if your QML logger software
version is lower than 3.02, the report section will be disabled and you
cannot access it.
When you start formatting a log group report, all the boxes in the frame
will be empty. To format the report, proceed as follows:
1. In the Log Groups frame, select the log group for which the report
is.
2. Click the Reporting tab.