Vaisala Hydromet Data Collection Platform - Manual (Page 144)

User’s Guide ______________________________________________________________________
142 __________________________________________________________________M210785EN-E
- Advanced user level is for experienced users only. On this level,
you will have access to more parameters, thus allowing you to
create a setup with more advanced features. You need to have a
thorough understanding of the system functionality in order to be
able to fully utilize the advanced features.
To change the user level, proceed as follows:
1. In the View menu, choose Options.
2. Under the General tab, select the desired user level and click OK.
External Script
Lizard Setup Software allows additions to the actual code of the setup
file, also referred to as the script. These additions can be, for example,
functions that Lizard Setup Software does not directly support. You can
make these additions with the external script function.
On the Advanced user level, an External Script frame is visible in the
Setup view, as presented in
Figure 66 on page 143 . Using the syntax of
the ADCL script language, you can add a code section which will be
inserted to the end of the generated downloadable setup file under the
heading External Script. The modified external script will be stored
into the current setup.
NOTE Additions to the external script should be made in cooperation with
Vaisala personnel.
NOTE Write any external script with careful consideration, as Lizard Setup
Software does not check the syntax. If the syntax is incorrect, you will
receive an error message when you try to run the external script.