Vaisala Hydromet Data Collection Platform - Manual (Page 178)

User’s Guide ______________________________________________________________________
176 __________________________________________________________________M210785EN-E
Timer Configuration
This section provides detailed information on the advanced
configuration of timers.
Principles of Timed Operation
All actions performed by the configured weather station are
synchronized by application timers. To provide the correct interval and
sequence of execution, for example, to perform measurements before
calculations, the parameters of the related timers must be set correctly.
In most cases, Lizard Setup Software takes care of sequencing in such
a way that you only have to adjust timer intervals manually to meet the
requirements of specific applications.
Timer Operation and Parameters
This section describes the timing parameters as handled by the QML
logger. The following presentation of parameters only appears on the
Advanced user level. On the Normal user level, the presentation of
parameters is simplified.