Vaisala Hydromet Data Collection Platform - Manual (Page 33)

Chapter 3 ____________________________________________________________ Getting Started
VAISALA_______________________________________________________________________ 31
Wizard Tool
The Wizard tool makes the initial creation of setups easier, in other
words, it helps you create basic setups which can be further modified
with Lizard software. Once you have modified the setups with Lizard
software, however, you can no longer open them with the Wizard tool.
An example view of the Wizard tool is presented in
Figure 8 on page 32 .
The basic Wizard view includes two important components: the
selection box and the information pane. The basic logic of the Wizard
tool is similar to that of Lizard Setup Software. You create a setup by
going through all the Wizard views. This includes making the necessary
selections in the selection box and moving on to the next view. For more
detailed information on creating setups with the Wizard tool, see section
Creating a Setup with Wizard on page 34 .
The basic Wizard view also includes several buttons that are located on
the lower right. You can navigate between the views with the Next and
Back buttons. If you wish to exit the Wizard tool without saving the
setup, click Abort. In the last view you can complete the setup by
clicking Finish. Most Wizard views also include a Clear All button
which you can use for clearing the selections made.
As in Lizard software, there is an information pane on the lower left of
each Wizard view which displays general help information on selected
items.
NOTE Due to the limitations of the sensor set available in the Wizard tool,
you may want to use the Lizard setup to create setups. Refer to
Chapter
4, Basic Use of Lizard Setup Software, on page 49 for instructions.