Modifying a setup with wizard, Figure 21, Completing the setup – Vaisala Hydromet Data Collection Platform User Manual
Page 45
Chapter 3 ____________________________________________________________ Getting Started
VAISALA_______________________________________________________________________ 43
0804-043
Figure 21
Completing the Setup
Modifying a Setup with Wizard
Only the setups that have been created with the Wizard tool, that is, the
setups indicated by an asterisk (*), can be modified with the Wizard
tool. To modify a setup with the Wizard tool, proceed as follows:
1.
Select the setup you want to modify from the Select Setup frame
by clicking on it.
2.
If you want to modify an existing setup, click Open. If you want to
create a copy of an existing setup and modify the copy, click Open
Copy.
3.
The selected setup or a copy of the setup appears in the Configure
setup frame. The program automatically generates a name for the
copy that is slightly different from the original.
4.
If necessary, you can edit the name, the description, and the version
of the setup.
NOTE
If the version you select is higher than the one your QML logger
actually has, the logger will not run the setup file.