Selecting serial sensors, Removing serial sensors, Selecting serial sensors removing serial sensors – Vaisala Hydromet Data Collection Platform User Manual
Page 80
User’s Guide ______________________________________________________________________
78 ___________________________________________________________________M210785EN-E
Selecting Serial Sensors
To add a serial sensor or device to your setup, proceed as follows:
1.
In the Additional sensors view, select the sensor or device from
the Available list.
2.
Click the Add button.
For configuration instructions on each sensor or device, refer to Vaisala
HydroMet™ Data Collection Platform User’s Guide, Volume 3.
Removing Serial Sensors
To remove a serial sensor or device from the setup, proceed as follows:
1.
Select the sensor or device to be removed by clicking on the
appropriate row in the Selected list box.
2.
Click the Remove button.
The sensor or device is removed from the setup.