Vaisala Hydromet Data Collection Platform - Manual (Page 131)

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA______________________________________________________________________ 129
3. The alarm will be listed in the Name/Type list box. The name of
the alarm is automatically highlighted suggesting that it can be
changed to a more descriptive one. If necessary, change the name
at this point, since it may be more difficult or even impossible to
do so at a later stage.
4. A blank Configure frame to be filled out appears on the left of the
view.
Removing Alarms
To remove an alarm, proceed as follows:
1. Click on the row that lists the alarm to be removed in the Name/
Type list box.
2. Click the Remove button.
The alarm is permanently removed from the setup.
Configuring Alarms
Alarms are configured in the Configure frame. When you click on the
desired alarm in the Name/Type list box, the Configure frame appears.
To configure the settings of an alarm, proceed as follows:
1. In the Monitored Value frame, choose the variable to be
monitored by the alarm by selecting the source and the variable
from the corresponding combo boxes.
2. In the Target frame, choose the report to be sent with the alarm.
Select the desired report from the Report on activation combo
box. If necessary, you can also choose another report to notify you
when the alarm condition has seized to exist. Select this optional
report from the Report on deactivation combo box. If you are
configuring a save log group alarm, simply choose the log group to
be saved instead of the report to be sent. The procedure is the same.
3. In the Condition frame, choose the limits to be verified. First,
select the value to be monitored from the Test options, and then
enter the reference value into the corresponding text box below.