Vaisala Hydromet Data Collection Platform - Manual (Page 74)

User’s Guide ______________________________________________________________________
72 ___________________________________________________________________M210785EN-E
4. Select if you want the QML logger to accept incoming connections
from this interface. For interfaces using the devices Siemens
GPRS-IP and PSTN-IP, you can select whether the incoming
connection uses a TCP/IP-based connection or not: for TCP/IP,
select the option Yes from the list; for connections without TCP/IP
(such as data calls), select the option Yes, without PPP. If you
select the latter option, you can use data calls, for example, for the
service connection to a GPRS interface, even though the data
transmission on the interface uses TCP/IP.
IP Services View
In the IP services view, you can configure the IP services to be included
in your setup; see
Figure 30 on page 72 .
1004-065 Figure 30 IP Services View