Vaisala Hydromet Data Collection Platform - Manual (Page 140)

User’s Guide ______________________________________________________________________
138 __________________________________________________________________M210785EN-E
To display and/or to print the setup information, proceed as follows:
1. Click on an item in the Select information list. The selected
information appears in the View selected information frame.
2. Click the Print button to send the displayed information to a
printer. Usually, a print properties window appears. It allows you
to select the destination printer and other printing options. Once the
information is correct, click OK to proceed with the printing.
Generating and Uploading a Setup
This section describes how to generate a setup and upload it to the QML
logger. The setup is usually generated and uploaded once it has been
created. Generation is accomplished either from the Setup menu or with
the Generate button. You can also upload the setup to the logger using
the AWS Client program.
Generating a Setup for QML Logger
When you have finished creating or modifying a setup, it must be
generated in order to be uploaded to the QML logger. Generating a
setup means converting the file on your PC into a format that the logger
can understand. Only after the setup is generated can it be uploaded into
the QML logger, in other words, transferred into the logger and taken
into use.
Generating a Setup with or without
Script Comments
To generate a setup, proceed using either of the following two ways:
- Select Generate from the Setup menu.
or
- Click the Generate button on the lower right of each view.
By default, script comments are not included in the script file. To create
a setup with comments, select Generate setup with script comments
from the Setup menu.