Vaisala Hydromet Data Collection Platform - Manual (Page 150)

User’s Guide ______________________________________________________________________
148 __________________________________________________________________M210785EN-E
strings, true/false parameters, floating-point numbers, and integers,
respectively.
5. Enter a default value for the parameter, either by double clicking
the value field and entering a value or by selecting a value from the
list (parameters of type Boolean).
To remove a parameter from group, proceed as follows:
1. Select the parameter to be deleted from the list.
2. Click Remove.
3. Confirm removing the parameter by clicking Yes. You can also
cancel removing the parameter by clicking No.
In addition to being configured in Lizard Setup Software, parameter sets
and the parameters contained in them can also be changed at runtime
using QML logger shell commands. The commands for managing
parameter sets are described in section Commands for Parameter Sets
in Vaisala HydroMet™ Data Collection Platform User’s Guide,
Volume 3.
NOTE Default values provided by the setup never overwrite any existing
station-specific settings in the QML logger. If the existing parameters
in QML have not been modified from the previous setup default
values, new defaults from the setup will overwrite them.
When you need to start with a clean configuration, remember that in
addition to loading a new setup, you need to erase the static parameters
and parameter sets associated with the earlier setup.