Vaisala Hydromet Data Collection Platform - Manual (Page 111)

Chapter 4 ____________________________________________ Basic Use of Lizard Setup Software
VAISALA______________________________________________________________________ 109
Adding Rows or Columns
The Add row/col button, under the Configure report frame, enables
you to add rows and columns.
To add rows or columns, proceed as follows:
1. Select a column or a row in front of which you want to add a new
one by clicking the gray number cell above the column or on the
left of the row. The Add row/col button is enabled and changes
into either an Add row or Add column button, depending on
which element you have selected.
2. Click the Add row or the Add column button. A new row or
column appears in front of the existing one.
Removing Rows or Columns
The Del row/col button, under the Configure report frame, enables
you to the delete rows and columns.
To delete rows or columns, proceed as follows:
1. Select the column or row to be removed by clicking the gray
number cell above the column or on the left of the row. The Del
row/col button is enabled and changes into either a Del row or Del
column button, depending on which element you have selected.
2. Click the Del row or the Del column button. The row or column is
deleted.
Unit Conversion in Reports
All the internal calculations in the QML logger are done in SI units.
However, you can convert measured or calculated values into another
unit before storing data into the log memory. Typically, these
conversions are made from an SI unit to a US unit, for example, from
meters per second to miles per hour. There are several predefined
conversions that you can select from the list. Only those specified for
each unit are displayed. For example, there is no conversion from
NOTE The information pane with general help information is available on all
the configurable items in case you need more detailed information.