Figure 36, Utility menu – Vaisala Hydromet Data Collection Platform User Manual
Page 88
User’s Guide ______________________________________________________________________
86 ___________________________________________________________________M210785EN-E
0511-010
Figure 36
Utility Menu
To copy a calculation inside the setup, proceed as follows:
1.
Open the calculation for editing.
2.
On the Utility menu, select Copy Calculation.
3.
On the Utility menu, select Paste.
4.
You can rename the copy. The default name for the copy is the
original name with the ending "_n" where n is a consecutive
number. For example, the first copy of the calculation
PMT16AMeas_24 will be named PMT16AMeas_24_1.
To copy a calculation from one setup to another, proceed as follows:
1.
Open the calculation for editing.
2.
In the Utility menu, select Copy.
3.
Open the Setup view.
4.
In the Setup view, open another setup or create a new setup.
NOTE
When making a configuration copy inside the setup, do not close the
configuration view between the Copy and the Paste commands. If you
close the view, you will disconnect all variable references as explained
below.