Agilent Technologies 34401A - Manual (Page 165)

Boolean Parameters Boolean parameters represent a single binary
condition that is either true or false. For a false condition, the multimeter
will accept “
OFF ” or “0”. For a true condition, the multimeter will accept
“ ON ” or “1”. When you query a boolean setting, the instrument will
always return “0” or “1”. The following command uses a boolean parameter:
INPut:IMPedance:AUTO {OFF|ON}
String Parameters String parameters can contain virtually any set
of
ASCII characters. A string must begin and end with matching quotes;
either with a single quote or with a double quote. You can include the
quote delimiter as part of the string by typing it twice without any
characters in between. The following command uses a string parameter:
DISPlay:TEXT < quoted string >
Output Data Formats
Output data will be in one of formats shown in the table below.
Type of Output Data
Non-reading queries
Single reading (IEEE-488)
Multiple readings (IEEE-488)
Single reading (RS-232)
Multiple readings (RS-232)
Output Data Format
< 80 ASCII character string
SD.DDDDDDDDESDD<nl>
SD.DDDDDDDDESDD,...,...,<nl>
SD.DDDDDDDDESDD<cr><nl>
SD.DDDDDDDDESDD,...,...,<cr><nl>
S Negative sign or positive sign
D Numeric digits
E Exponent
<nl> newline character
<cr> carriage return character
4
Chapter 4 Remote Interface Reference
Output Data Formats
159