Allied Telesis AT-S63 - Manual (Page 121)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 121
Deleting Syslog Output Definitions
To delete a syslog output definition:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the System button.
3. Select the Event Log tab, shown in Figure 30 on page 106.
4. In the Configure Log Outputs section of the tab, click the radio button
of the syslog output definition you want to delete and click the Delete
button. You can delete only one definition at a time.
The syslog output definition is deleted from the list and the switch
stops sending log events to the syslog server.
5. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.