Configuring igmp snooping, Figure 36: igmp tab, Table 19: igmp tab – Allied Telesis AT-S63 User Manual
Page 124
Advertising
Chapter 10: IGMP Snooping
124
Section II: Advanced Operations
Configuring IGMP Snooping
To configure IGMP snooping:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Multicast button to display the
Figure 36. IGMP Tab
3. Configure the parameters, described in Table 19, as needed.
Table 19. IGMP Tab
Parameter
Definition
Enable IGMP Snooping
Status
Enables and disables IGMP snooping on
the stack. A check in the box indicates
that IGMP snooping is enabled.
Multicast Host Topology
Defines whether there is only one host
node per port or multiple host nodes per
port. Possible settings are Edge (Single-
Host/Port) and Intermediate (Multi-Host/
Port).
Advertising