Allied Telesis AT-S63 - Manual (Page 127)

AT-S63 Management Software Web Browser User’s Guide
Section II: Advanced Operations 127
Displaying the Host Nodes and the Multicast Routers
To view the host nodes and the multicast routers connected to the ports on
the stack:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Multicast button to display the
IGMP tab shown in Figure 37.
Figure 37. IGMP Tab (Monitoring)
The parameters in the tab are defined in Table 19 on page 124.
3. To view the multicast addresses and the host nodes, click the View
Multicast Hosts List radio button and the View button. The contents
of the window are described in this table.
Table 20. View Multicast Hosts List Window
Column Definition
Multicast Group The multicast address of the group.
VLAN ID The VID of the VLAN where the port is an
untagged member.