Allied Telesis AT-S63 - Manual (Page 221)

Section VI: Port Security 221
Chapter 14
802.1x Port-based Network Access
Control
This chapter contains instructions on how to configure the 802.1x Port-
based Network Access Control feature on the stack. The chapter contains
the following sections:
 “Setting the Port Roles” on page 222
 “Enabling or Disabling 802.1x Port-based Network Access Control” on
page 224
 “Configuring the Authenticator Port Parameters” on page 225
 “Configuring the Supplicant Port Parameters” on page 232
 “Displaying the Port Parameters and Port Status” on page 235
 “Configuring RADIUS Accounting” on page 238
 “Displaying the RADIUS Accounting Settings” on page 240
Note
You cannot configure the RADIUS authentication client on the stack
from the web browser windows. Rather, that management function
has to be performed from the command line commands. For
instructions, refer to the AT-S63 Command Line User’s Guide for
AT-9400 Stacks.