Allied Telesis AT-S63 - Manual (Page 77)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 77
Deleting Static Port Trunks
Caution
To prevent the formation of loops and broadcast storms in your
network, disconnect the cables from the ports of a trunk before
deleting it.
To delete a port trunk from the stack:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Layer 1 button.
3. Click the Port Trunking tab, shown in Figure 19 on page 72.
4. Click the radio button of the port trunk you want to delete and click the
Remove button. The port trunk is deleted from the switch. You can
delete only one trunk at a time.
5. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.