Allied Telesis AT-S63 - Manual (Page 147)

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 147
6. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.
Security Level (continued) Authentication - This option represents authentication, but no
privacy protocol. Select this security level if you want to
authenticate SNMP users, but you do not want to encrypt
messages using a privacy protocol.You can select this value if
you configured the Security Model parameter with the SNMPv3
protocol.
Privacy - This option represents authentication and the privacy
protocol. Select this security level to encrypt messages using a
privacy protocol and authenticate SNMP entities. This level
provides the greatest level of security. You can select this value
if you configured the Security Model parameter with the
SNMPv3 protocol.
Note
The only security level for SNMPv1 and SNMPv2c is No
Authentication/Privacy.
Context Match This parameter is preset to exact and cannot be changed.
Storage Type The storage method of the entry. The possible values are:
V-Volatile - This setting prevents the stack from saving the
entry in the master configuration file. An entry with this storage
type is discarded the next time the stack is reset or powered
off.
N-NonVolatile - This setting allows the stack to save the entry
in the master configuration file when the save command is
issued. Allied Telesis recommends this storage type.
Row Status The status of the entry. All entries have a status of Active.
Table 24. SNMPv3 Access Table Parameters
Parameter Description