Displaying the securitytogroup table entries – Allied Telesis AT-S63 User Manual
Page 175
Advertising
AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3
175
Displaying the
SecurityToGroup
Table Entries
To display the entries in the SNMPv3 SecurityToGroup Table:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for View
SecurityToGroup Table and the View button to display the SNMPv3
SecurityToGroup Table tab in Figure 65. The parameters that define
security to group entries are described in Table 25 on page 151.
Figure 65. SNMPv3 SecurityToGroup Table Tab (Monitoring)
Advertising