Deleting unicast or multicast mac addresses – Allied Telesis AT-S63 User Manual
Page 67
AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations
67
Deleting Unicast or Multicast MAC Addresses
To delete a static or dynamic unicast or multicast MAC address from the
stack:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Layer 2 button.
3. If the MAC Address tab is not selected, click it. The tab is shown in
4. Display the MAC addresses on the master switch, as explained in
“Displaying the MAC Address Table” on page 62.
5. Click the button next to the MAC address you want to delete from the
master switch. You can delete only one address at a time.
Note
You cannot delete a switch’s MAC address, an STP BPDU MAC
address, or a broadcast address.
6. Click the Remove button to remove the MAC address from the table.
7. To save your changes in the master configuration file, click the Save
Config button in the Configuration menu.