Allied Telesis AT-S63 - Manual (Page 94)

Chapter 7: File System
94 Section II: Advanced Operations
Listing the Files in Flash Memory or on a Compact Flash Card
To display a list of the system files that are stored in the master switch’s
flash memory or on a compact flash card:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Utilities button.
3. Select the File System tab. to display the FIle System tab in
Figure 27.
Figure 27. File System Tab
The Current Drives field specifies the location of the files that are
displayed in the Current Files section of the tab. The two options are
Flash, which is the switch’s flash memory and is the default setting,
and Compact Flash, which is the compact flash slot.
The Default Configuration File field specifies the filename of the active
configuration file that the stack uses to store its parameter settings and
to configure its operating parameters when reset or power cycled.