Allied Telesis AT-S63 - Manual (Page 73)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Operations 73
The table lists the current static ports trunks in the stack. Table 11
describes the columns in the table.
4. To create a new static trunk, click the Add button to display the Add
New Trunk popup window in Figure 20.
Figure 20. Add New Trunk Window
Table 11. Port Trunking Tab
Column Definition
ID Displays the ID numbers of the trunks.
Name Displays the names of the trunks.
Type Displays the load distribution methods.
The possible settings are:
SA - Source MAC address (Layer 2)
DA - Destination MAC address (Layer 2)
SA/DA - Source MAC address /
destination MAC address (Layer 2)
SI - Source IP address (Layer 3)
DI - Destination IP address (Layer 3)
SI/DI - Source IP address /destination IP
address (Layer 3)
Ports Displays the ports of the trunks.