Table 23: snmpv3 view table parameters, Figure 42 – Allied Telesis AT-S63 User Manual
Page 140
Advertising
Chapter 11: SNMPv3
140
Section III: SNMPv3
Figure 42. Add New SNMPv3 View Page
5. Configure the parameters, described in Table 23, for the new entry
and click the Apply button.
Table 23. SNMPv3 View Table Parameters
Parameter
Description
View Name
A descriptive name for this view of up to 32 alphanumeric
characters.
Note
The “defaultViewAll” value is the default entry for the
SNMPv1 and SNMPv2c configuration. You cannot use
this default value for an SNMPv3 View Table entry.
Subtree OID
The subtree that this view will or will not be permitted to
display. You can enter either a numeric value in hex format or
the equivalent text name. For example, the OID hex format for
TCP/IP is:
1.3.6.1.2.1.6
The text format for TCP/IP is:
tcp
Advertising