Allied Telesis AT-S63 - Manual (Page 81)

AT-S63 Management Software Web Browser User’s Guide
Section I: Basic Features 81
Creating the Port Mirror
To configure the port mirror:
1. From the home page, click the Configuration button.
2. From the Configuration menu, click the Layer 1 button.
3. Click the Port Mirroring tab, shown in Figure 23.
Figure 23. Port Mirroring Tab
Table 12 describes the columns in the Port Mirroring table.
Table 12. Port Mirroring Tab
Column Definition
Mirror to Port Displays the destination port of the
mirrored traffic. A stack can have only one
destination port. A value of 0.0 (zero)
means there is no port mirror.
Ingress Ports Displays the source ports of mirrored
ingress traffic.
Egress Ports Displays the sources ports of mirrored
egress traffic.