Allied Telesis AT-S63 - Manual (Page 177)

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 177
Displaying the
Target Address
Table Entries
To display the entries in the SNMPv3 Target Address Table:
1. From the Home page, click the Monitoring button.
2. From the Monitoring menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for View Target
Address Table and the View button to display the SNMPv3 Target
Address Table tab in Figure 67. The parameters that define target
address table entries are described in Table 27 on page 159.
Figure 67. SNMPv3 Target Address Table Tab (Monitoring)