Allied Telesis AT-S63 - Manual (Page 139)

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 139
Configuring the SNMPv3 View Table
To create, delete, or modify SNMPv3 View Table entries, refer to the
following procedures:
 “Creating a View Table Entry” on page 139
 “Deleting a View Table Entry” on page 142
 “Modifying a View Table Entry” on page 142
Creating a View
Table Entry
To create an entry in the SNMPv3 View Table:
1. From the Home page, click the Configuration button.
2. From the Configuration menu, click the Mgmt. Protocols button to
display the SNMP tab, shown in Figure 11 on page 50.
3. In the SNMPv3 section, click the radio button for Configure View
Table and then click the Configure to display the SNMPv3 View Table
tab Figure 41.
Figure 41. SNMPv3 View Table Tab
4. Click the Add button to display the Add New SNMPv3 View page in
Figure 42.