Allied Telesis AT-S63 - Manual (Page 169)

AT-S63 Management Software Web Browser User’s Guide
Section III: SNMPv3 169
Figure 60. Add New SNMPv3 Community Page
5. Configure the parameters, described in Table 28, for the new entry and
click the Apply button.
Table 29. SNMPv3 Community Table Parameters
Parameter Description
Community Index An index value of up to 32- alphanumeric characters.
Community Name A community name of up to 64-alphanumeric characters. The
community name acts as a password for the SNMPv3
Community Table entry. This parameter is case sensitive.
Security Name A name of up to 32 alphanumeric characters of an SNMPv1
and SNMPv2c user. The name must be unique.
Transport Tag A name of up to 32 alphanumeric characters. The Transport
Tag parameter links an SNMPv3 Community Table entry to an
SNMPv3 Target Address Table entry. Add the value of the
Transport Tag parameter to the Tag List parameter in the
Target Address Table. See “Creating a Target Address Table
Entry” on page 158.
Storage Type The storage method of the entry. The possible values are:
V-Volatile - This setting prevents the stack from saving the
entry in the master configuration file. An entry with this storage
type is discarded the next time the stack is reset or powered
off.
N-NonVolatile - This setting allows the stack to save the entry
in the master configuration file when the save command is
issued. Allied Telesis recommends this storage type.
Row Status The status of the entry. All entries have a status of Active.