Table 8: snmpv1 and snmpv2c community parameters – Allied Telesis AT-S63 User Manual
Page 54
Advertising
Chapter 3: SNMPv1 and SNMPv2c
54
Section I: Basic Operations
Figure 13. Add New SNMPv1 & SNMPv2c Community Page
5. Configure the parameters, described in Table 8, as needed.
Table 8. SNMPv1 and SNMPv2c Community Parameters
Parameter
Definition
Community Name
Specifies the community string. The name
can be up to 32 alphanumeric characters.
Spaces and special characters (such as /,
#, or &) are not permitted.
Status
Enables or disables the community string.
A disabled community string cannot be
used to manage a stack. The default is
enabled.
Advertising