JLG 460SJ Service Manual - Manual (Page 134)

SECTION 3 - CHASSIS & TURNTABLE
3-82 – JLG Lift – 3120895
1.25 - 1.38 in.
When final settings
are completed torque
to 49 in. Lbs. Dry.
Actuator should be free to pivot
on shoulder bolt when properly installed
shoulder bolt should be installed into
the actuator block with loctite # 242.
Note: Addco actuator must be adjusted
to be sure the mechanical stroke is
centered and has adjustment outside
of the Deutz engine throttle stops.
This will ensure that the electrical
adjustment will be within limits of
the engine throttles mechanical stops.
Lift sleeve on socket end to
disconnect pivot ball to
check adjustment.
Spring
Bracket
Addco retracted
Engine Throttle (Idle)
Engine Throttle (Mid Eng)
Engine Throttle (Hi Eng)
Addco Extended
Deutz
Engine
Stops
Ref:
Figure 3-47. Addco Throttle Actuator