JLG 460SJ Service Manual - Manual (Page 411)

SECTION 7 - BASIC ELECTRICAL INFORMATION & SCHEMATICS
3120895 – JLG Lift – 7-9
3. After all required contacts have been inserted, the
wedge lock must be closed to its locked position.
Release the locking latches by squeezing them
inward (See Figure 7-10.).
4. Slide the wedge lock into the housing until it is flush
with the housing (See Figure 7-11.).
Figure 7-9. Connector Assembly Figure 2
Figure 7-10. Connector Assembly Figure 3
Figure 7-11. Connector Assembly Figure 4