Directives and standards, Warranty information, Directives and standards 1.4. warranty information – ElmoMC Gold Line Digital Servo Drives-Gold Solo Trombone User Manual
Page 10
Gold Solo Trombone Installation Guide
Safety Information
MAN-G-SOLTROIG (Ver. 1.3)
10
1.3. Directives and Standards
The Gold Solo Trombone conforms to the following industry safety standards:
Safety Standard
Item
Approved IEC/EN 61800-5-1, Safety Adjustable speed electrical power drive systems
Recognized UL 508C
Power Conversion Equipment
In compliance with UL 840
Insulation Coordination Including Clearances and
Creepage Distances for Electrical Equipment
In compliance with UL 60950-1
(formerly UL 1950)
Safety of Information Technology Equipment
Including Electrical Business Equipment
In compliance with EN 60204-1
Low Voltage Directive 73/23/EEC
The Gold Solo Trombone servo drive has been developed, produced, tested and documented in
accordance with the relevant standards. Elmo Motion Control is not responsible for any
deviation from the configuration and installation described in this documentation.
Furthermore, Elmo is not responsible for the performance of new measurements or ensuring
that regulatory requirements are met.
1.4. Warranty Information
The products covered in this manual are warranted to be free of defects in material and
workmanship and conform to the specifications stated either within this document or in the
product catalog description. All Elmo drives are warranted for a period of 12 months from the
time of installation, or 18 months from time of shipment, whichever comes first. No other
warranties, expressed or implied — and including a warranty of merchantability and fitness for
a particular purpose — extend beyond this warranty.