How to use this guide – ElmoMC Gold Line Digital Servo Drives-Gold Solo Trombone User Manual
Page 19
Gold Solo Trombone Installation Guide
Product Description
MAN-G-SOLTROIG (Ver. 1.3)
19
2.4. How to Use this Guide
In order to install and operate your Elmo Gold Solo Trombone servo drive, you will use this
manual in conjunction with a set of Elmo documentation. Installation is your first step; after
carefully reading the safety instructions in the first chapter, the following chapters provide you
with installation instructions as follows:
•
Chapter 3 - Installation
, provides step-by-step instructions for unpacking, mounting,
connecting and powering up the Gold Solo Trombone.
•
Chapter 4 - Technical Specifications
, lists all the drive ratings and specifications.
Upon completing the instructions in this guide, your Gold Solo Trombone servo drive should be
successfully mounted and installed. From this stage, you need to consult higher-level Elmo
documentation in order to set up and fine-tune the system for optimal operation.
• The Gold Product Line Software Manual, which describes the comprehensive software used
with the Gold Solo Trombone
• The Gold Product Line Command Reference Manual, which describes, in detail, each
software command used to manipulate the Gold Solo Trombone motion controller
• The Elmo Application Studio Software Manual, which includes explanations of all the
software tools that are part of the Elmo Application Studio software environment