Usb 2.0 communication – ElmoMC Gold Line Digital Servo Drives-Gold Solo Trombone User Manual
Page 81
Advertising
Gold Solo Trombone Installation Guide
Installation
MAN-G-SOLTROIG (Ver. 1.3)
81
4.11.2. USB 2.0 Communication
The USB network consists of Host controller and multiple devices. The Gold Solo Trombone is a
USB Device.
Notes for connecting the USB communication cable:
• Connect a mini USB cable.
• D+ and D- are a twisted pair in the cable.
• The maximum cable length is 5 m.
• The cable shield should only be connected to Ground at the host.
• The shield of the cable is connected to the shield of the connector used for
communications.
Pin Signal
Function
1
USB VBUS
USB VBUS 5 V
2
USBD-
USB _N line
3
USBD+
USB _P line
5
USB COMRET
USB communication return
Pin Positions
Table 26: USB 2.0 – Pin Assignments
Advertising