Rockwell Automation 150 USE MN/SMC DIALOG + CONTROLLER - Manual (Page 2)

Please Read! This manual is intended to guide qualified personnel in the
installation and operation of this product.
Because of the variety of uses for this equipment and because of the
differences between this solid-state equipment and electromechanical
equipment, the user of and those responsible for applying this
equipment must satisfy themselves as to the acceptability of each
application and use of the equipment. In no event will Allen-Bradley
Company, Inc. be responsible or liable for indirect or consequential
damages resulting from the use or application of this equipment.
The illustrations shown in this manual are intended solely to illustrate
the text of this manual. Because of the many variables and
requirements associated with any particular installation, the Allen-
Bradley Company, Inc. cannot assume responsibility or liability for
actual use based on the illustrative uses and applications.
No patent liability is assumed by Allen-Bradley Company, Inc. with
respect to use of information, circuits, or equipment described in this
text.
Reproduction of the content of this manual, in whole or in part,
without written permission of the Allen-Bradley Company, Inc. is
prohibited.
Important User Information The information in this manual is organized in numbered chapters.
Read each chapter in sequence and perform procedures when you are
instructed to do so. Do not proceed to the next chapter until you have
completed all procedures.
Throughout this manual attention statements make you aware of
safety considerations:
Attentions help you:
• Identify a hazard
• Avoid the hazard
• Recognize the consequences
Important: Identifies information that is especially important for
successful application and understanding of this product.
SMC Dialog Plus, SMB, SCANport, and Accu-Stop are trademarks of Rockwell Automation.
DeviceNet is a trademark of the Open DeviceNet Vendors Association (O.D.V.A.)
!
ATTENTION: Identifies information about practices
or circumstances that can lead to personal injury or
death, property damage, or economic loss.
For Bulletin 150 SMC Smart Motor Controller technical support on start-up or existing
installations, contact your Allen-Bradley representative. In the United States and Canada, you
can also call 1-800-765-SMCS (765-7627) for assistance Monday through Friday from 8:00
a.m. to 12:00 noon and 1:00 p.m. to 4:30 p.m. (central time zone). Areas outside the United
States and Canada can call 001-414-382-4650 for assistance.