Control wiring for scanport control – Rockwell Automation 150 USE MN/SMC DIALOG + CONTROLLER User Manual
Page 89
Advertising
Options
7-5
Control Wiring for
SCANport Control
Refer to Figure 3.14 on page 3-10 for the applicable wiring diagram
to achieve start-stop control via the SCANport.
Soft Stop, Pump Control, and
SMB Smart Motor Braking Options
Figure 7.1 through Figure 7.6 show the different wiring for the Soft
Stop, Pump Control, and SMB Smart Motor Braking options.
Figure 7.1 Typical Wiring Diagram
①
Customer supplied.
②
Soft Stop, Pump Stop, or Brake.
③
Refer to the controller nameplate to verify the rating of the control power input voltage.
Note: Refer to Chapter 3 for typical power circuits.
Stop
➀
Control Power
➂
Option Stop
➀ ➁
Start
➀
11 12 13 14 15 16 17 18 19 20
21 22 23 24 25 26 27 28 29 30
Internal
Auxiliary
Contacts
SMC Dialog Plus
Control Terminals
Advertising