Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual - Manual (Page 109)

User Manual Options dialog

103
Close project when the last marker type was closed
If the box was checked, the project is closed once the last register (see "User
interface") was closed.
Otherwise, you can reopen the register cards via the project tree view.
Show overflow detection (Import, Printing)
If the box was checked, the program automatically checks whether all characters of a
field are shown after an import or before printing.
If not, the fields are displayed as follows (see also "Adjust font size"):
Use extended E-Plan-Assistant
If the box was checked, the import wizard also shows the page with the delimiters
when importing WEx files.
The delimiters are set as a default in the WEx files and should not be modified.
Show Import Wizard with XML
XML files can be imported or opened using the command line (see chapter "Command
line").
If the box was checked, the import wizard is shown if the file is opened using the
command line. Otherwise, the import is controlled using the default settings or a script
file (see chapter "Import").
Import Project Text into marker
If the box was checked, all texts that are inserted on the project layer are inserted on
the marker areas instead.(see chapter "Importing project text onto markers")