Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 150
Advertising
144
User Manual
1
Settings
Show the printer setting dialog, if available.
The ClearMark is set in the Options menu (see chapter "Options
– ClearMark”).
2
Mapping
Map a printer to the selected marker type. The mapping is saved. To change the
mapping, see chapter "Mapping the printer and marker type".
3
Calibration
Adjusting the printer to the selected marker type (see chapter "Adjust printer
offset").
4
Number of copies
How many times shall the print job be effected?
The printout can also be separated by markers (duplicates) (see section "Setting
up print jobs").
5
All marker types
All marker types of the list are printed.
6
Marker type
Only the selected marker type is printed.
Advertising