Rockwell Automation 1492-PRINT110_PRINT220 ClearTools User Manual User Manual
Page 159
Advertising
User Manual
153
Adjusting the left and top margins
Settings for markers
To adjust the left and top margins of a Marker Card mat, you must print a coordinate plane on a
Marker Card mat and measure its position.
The coordinate plane should be in the following position:
To print a test coordinate plane click on the Print Coordinate Plane... button.
The "Print Coordinate Plane" window opens during printing.
Measure the left and top margins of the printed coordinate plane as shown, enter the figures
in the corresponding fields and close the window with OK.
Advertising